Recommended

W820NB

W240TN

MS50A

Popular Searches

S1000MKII

Bookshelf Speaker for Your Daily Usage

Select Color: Brown

Back to Speakers
Overview
Specification
FAQ
Support

A New Classic for the Digital Era

With 120W RMS output power, fill vivid voice and immersive sound in every corner of your room. With Hi-Res AUDIO certified, it supports lossless musics with the bit depth and sampling rate up to 24-bit/192kHz. With a wider frequency response range of 45Hz-40kHz, it reproduces nearly every detail.

Hi-Fi Acoustic System True Stereo Sound

The 1" titanium diaphragm dome tweeters reproduce high frequency up to 40kHz, conveying crisp treble. The aluminium alloy diaphragm of 5.5" mid-bass drivers features fast transient response and low acoustic distortion, which produces clear mid-range and strong bass.

Less Resonance Minimum Distortion

Quality wooden enclosure minimizes acoustic resonance and further reduces distortion. The inclined front panel enables the drivers to direct sound right to your ears.

Bluetooth Connectivity for Seamless Music Streaming

Qualcomm® aptX™ HD is supported. Enjoy high-quality musics with the bit depth and sampling rate up to 24bit/48kHz.

216kHz Digital Audio Interface Transceiver (DIX) with Stereo ADC and Routing

The DIX supports the transmission and reception of digital signals with a bit depth and sampling rate up to 24bit/216kHz. The integrated ADC supports the conversion of analogue signals into digital signals with a bit depth and sampling rate up to 24bit/96kHz, as well as with the dynamic range up to 101dB. Using the RCA input, you can still enjoy high quality sound.

Stereo Audio CODEC with Embedded miniDSP

The codec supports stereo signals with a sampling rate up to 192kHz. Its embedded miniDSP precisely performs the dynamic range management and active crossover control. Using the optical input or coaxial input, you can enjoy lossless quality music.

Dual Digital Input Class-D Audio Amplifiers

The high-efficiency audio amplifiers support stereo signals with a sampling rate up to 192kHz. Each of two audio amplifiers enhances 2-way treble signals and mid-range / bass signals and transmits to the tweeter and the mid-bass driver respectively. With the high PWM frequency up to 768kHz, the distortion and noise can be minimized.

Craftsmanship Inherited for Long-lasting Classic

Designed with dedication, converted from critically selected materials, and carrying exquisite craftsmanship, this product proves itself as classic.

Rich Connectivity

Multiple interfaces are available for the connection to different audio sources. Enjoy the music from Optical, Coaxial, and Line In, just as you like .

Easy Control

With the knobs on the rear panel and the remote control, easily operate the product and enjoy full functions.

Specification

Signal-to-Noise Rate:

≥ 90dB (A)

Total Output Power (RMS):

35W×2 (Mid-Range / Bass) + 25W×2 (Treble)

Driver Units:

5.5" (Mid-Range / Bass) + 1" (Treble)

Frequency Response:

45Hz - 40kHz

Audio Inputs:

Line In 1, Line In 2, Optical, Coaxial, Bluetooth

lnput Sensitivity:

Line In 1: 700 ± 50mV;
Line In 2: 900 ± 50mV;
OPT / COAX: 350 ± 50mFFS;
Bluetooth: 450 ± 50mFFS

Bluetooth Version:

V5.0

Dimensions (W x H x D):

198mm × 343mm × 276mm (per speaker)

Net Weight:

16.7kg

FAQ
Why can’t I hear any sound?

Please check the following points:
1) The power indicator light should be ON
2) Try to turn up the volume
3) Make sure the audio cables are correctly connected
4) Make sure you set the input correctly on the speakers
5) The audio source should deliver a signal output

Why can’t I connect my speakers via Bluetooth?

Please check the below points:
1) Make sure your speaker is switched to Bluetooth mode. Disconnect any other devices from your speakers
2) Ensure the transmission range is within 10 meters.
3) Try another Bluetooth device for connection

Why can’t I turn on the speakers?

You can turn on the Edifier speakers by one of the following methods:
1) Connect the main power of your speakers
2) Switch on the wall outlet of your speakers

Why did noises coming from my speakers?

Please switch the system of these speakers to the active mode, and remove the audio source. There will be no problem with these speakers if you can't hear noises from 1 meter away.

Email Sign Up
Sign up to get Edifier emails and communications for exclusive first looks at promotions, new products and more.